The 21st CHINA GLASS 2010 Beijing is held at the China International Exhibition Center, Beijing on 4 to 7 June, 2010, and TGM exhibit the TOYO-TCI-2 Inspection Machine at the Pavilion: Hall W 1 Booth No. 350.

TGM manufacture and supply both of TOYO-TCI-1 and TOYO-TCI-2 Inspection Machine in China.
The maximum inspection speed in TOYO-TCI-1 is 130 BPM and TOYO-TCI-2 is 180 BPM.
These Inspection Machines are designed to meet the needs and wants from the customers in China with the latest technology of state of the art.

• TOYO-TCI-1 (PDF 605KB)
• TOYO-TCI-2 (PDF 571KB)

簡体中文

One set of TOYO-TCI-2 is delivered to Qinhuangdao Fangyuan Glass Co., Ltd. in Qinhuangdao City, Hebei Province, China.

Installation is done at the beginning of March and it begins to operate on March 16, 2010.

Specifications Summary

1. Maximum Inspection Speed: 180 bottles per minutes
2. Dimension and Shape of Glass Container:
   ・Body Diameter: Φ45 mm～85 mm
   ・Height: 50 mm～400 mm
   ・Shape: Round
               Non-round (Please make inquiries)
3. Inspection Items:
   ・Check: Sealing Surface Check, Thread Check, Neck Check,
               Shoulder Check, Body Check, Bottom Check
   ・Height: Variation of the Bottle Height
   ・Body Diameter: Variation of the Body Diameter and Out of Round
   ・Finish: Variation of the Finish Inner Diameter, Waving of Sealing Surface
   ・Mold Number Reader
   ・etc.
4. Number of Inspection Stations: 6 stations
5. Height of Installed Conveyer: Minimum 1000 mm

簡体中文

TGM participated China glass 2009 Shanghai and received the favorable response for the demonstration with TOYO-TCI-2 bottle inspection machine.

TGM is the manufacturer and supplier TOYO-TCI-1 and TOYO-TCI-2 in China.
The maximum inspection speed in TOYO-TCI-1 is 130BPM and TOYO-TCI-2 is 180BPM. These inspection machines are designed to meet the request from the customers in China with the latest technology of state of the art.

• TOYO-TCI-1 (PDF 605KB)
• TOYO-TCI-2 (PDF 571KB)

簡体中文

This mold uses the aluminum to the manufacture. We can provide with the short time delivery.

It is a device that arranges the packed retort product with the tray automatically.

Feature

• high-speed 90 bags/minute
• Simple job change, Simple mechanism
• Energy and space-saving
• Low-pressure air

This machine is to automatic out feeding the retort bag from the tray. It holds the bags softly and turn it round to out feeding. No bags is left behind on the tray.

Feature

• High-speed 5 trays/minute
• Simple job change (abt. 30 min.)
• Energy and space-saving
• Easy maintenance

What kind of machine is it, and can actually see by the customer because it prepares the demonstration machine.

Comprehensible material is prepared, and feel free to inquire, please.

We can manufacture the direct blow mold with the provided drawing and the contraction percentage. We manufacture the mold to the supplier from one set. We can manufacture the mold corresponding specification to forming machine. We can repair the chip with the crack.

We can manufacture the mold for PET bottle with the provided the drawing, contraction percentage and Pre-form. We can match the design and the manufacture with the forming machine. Please consult us about the machining expect the specular polish. We can repair the chip with the crack.

To inspect such defect as the foreign particles, damage, scorch generated from the injection. Selection can be made from among variety of series of PFI-16S, 18S, 24S and 36S PFI according to the job requirement.

Types

• PFI-16S, PFI-18S
• PFI-24S, PFI-36S

The machine removes the adhesion inside and outside of Preform is removed immediately before blowing performs to the PET bottle. A machine type can be selected from among the PFC models PFC-16S / 24S / 36S / and 42S according to the job requirement.

Types

• PFC-16S, PFC-24S
• PFC-36S, PFC-42S

The device is to design cutting excessive gate portion generated from preform injection.

Types

• PGC-24S

The machine is available to inspect the foreign particles, ovality or damages with preforms generated from injection.

Types

• POT-16S

We manufacture the various PET bottle for sample (made of chemical wood). It is possible to try the test shot of the sample bottle with the simple molding machine.